Keep it moving with On-Board Weighing, a factory-fit system which allows you to measure your bucket load on-the go, eliminating any disruption to the workflow. Simply use Volvo Co-Pilot – the high-resolution 10’’ touchscreen – to monitor loading progress, track materials and trucks, and change work orders in seconds.
Increase jobsite safety with a customizable alert, which notifies the operator if the bucket load exceeds a set limit. Get a full view of your surroundings when reversing thanks to the optional rear-view camera which automatically combines the rear-view and load information into a single screen. For additional safety, certain functions are disabled when speed exceeds 10km/h.
A guided calibration process, colored bars which indicate load activity progress, and icons which give insight into why the weight is not locked properly, combine to facilitate the loading process.
Select customer name and target tonnage with just a few touches.
Choose Project mode to control the total load of multiple trucks, or Trip mode, ideal for loading single trucks or crushers.
Get it right first time with tonnage measurements accurate to within +/- 1% for every bucket-load. When site conditions or customer requirements make it impossible to lock the load within this margin, simply switch to within an accuracy of +/- 2%.
Managing the last bucket of the trip is easy with tip off capability.
The system is optimized for standard bucket operations, and suitable for high tip buckets and side dump buckets. It is also compatible with forks and grapples (accuracy +/- 2%).
Production data is stored in the Volvo Co-Pilot and can be exported over the air to a cloud-based portal, or by using a USB-stick, enabling you to analyze machine usage and productivity. Fully integrated to the machine, the system populates CareTrack – combining productivity data and fuel data into a single report.
|Type of system||Fully dynamic*|
|Load range||Within the range of 5-150% of the machine working load|
|Unit of measure||Tonnes, short tons and lbs|
|Loading modes||Project and Trip mode|
|Loading multiple compartments||YES, up to 3 individual compartments|
|Tip-off functionality||Tip-off onto pile or tip-off onto truck|
|Rear view camera||YES, when reversing only, OR at all times in full mode or split screen|
|Number of work orders||More than 100 000|
|Number of attachments||More than 100 000|
|Number of customers
||More than 100 000|
|Number of trucks/targets||More than 100 000|
|Number of material types||More than 100 000|
|Data transferred via Cloud service via SIM card||Detailed data per bucket.
Weight, Material name, Target name, Customer name, Work order name
|Data transferred via USB||Detailed data per work order.
Work order name, Start and stop times, Total material loaded, Material type, Customer name
|Data transferred in CareTrack||Tonnes/tons, Liter/gallon, Ton(ne)/hour, Ton(ne)/liter or gallon, Liter or gallon of fuel/ton(ne), Number of cycles
|Operator manual||Accessible via touchscreen. Available in 25 languages
|Calibration time||One 15-20 second calibration per day* or after changing attachment
|Overload warning||Truck/target, Bucket
|Printer / Type||Thermal printer. Printouts can also be exported as pdf to USB
|Printer / Connectivity
|Printer / Information on printout
||Company name, Date, Time, Customer name, Work order name, Target, Weight, Bucket count
|*Depending on working conditions.|