Make overloading, underloading, reweighing and waiting times a thing of the past with On-Board Weighing, providing real-time insight into the bucket’s load. By measuring bucket load on the go, the dynamic system eliminates any disruption to the workflow.
Simply use the Volvo Co-Pilot touchscreen to monitor loading progress, track materials and trucks, as well as change work orders in seconds.
A customizable alert notifies the operator if the bucket load exceeds a set limit. When travelling at speeds over 10km/h (6 mph) certain functions are disabled, avoiding operator distractions.
Getting started with On-Board Weighing has never been easier, thanks to Simple Mode. Accessed by entering a pin code, this simplified version limits the tool to three core functions: viewing of the current load in trip mode, the loaded weight and printing a simplified receipt.
The perfect solution when working with lightweight material, this function enables operators to weigh loads which are currently under the lower limit of the system, reducing the limit of the machine’s rated working load from 5% to 1%.
Tonnage measurements are accurate to within +/- 1% for every load. When site conditions or customer requirements make it impossible to lock the load within this margin, simply switch to within an accuracy of +/- 2%.
Select customer name and target tonnage with just a few touches.
Managing the last bucket of the trip is easy with tip off capability.
Optimized for standard bucket operations, the system is also suitable for high tip buckets and side dump buckets, as well as compatible with forks and grapples (accuracy +/-2%). What’s more, operators will benefit from a guided calibration process.
Production data is stored in the Volvo Co-Pilot and can be exported over the air or by using a USB-stick. The system populates CareTrack combining productivity data and fuel data into a single report.
|Machine availability||L110H, L120H, L150H, L180H, L220H, L260H, L350H|
|Type of system||Fully dynamic*|
|Load range||Within the range of 5-150% of the machine working load|
|Load range - Low Load Mode||Within the range of 1-5% of the machine working load|
|Unit of measure||Tonnes, short tons and lbs|
|Task modes||Trip, Truck, Pile**, Process**|
|Loading multiple compartments||YES, up to 3 individual compartments|
|Tip-off functionality||Tip-off onto pile or tip-off onto truck|
|Rear-view camera, Radar detect system**||YES, when reversing only, OR at all times in full screen mode or split screen|
|Number of work orders||More than 100 000|
|Number of attachments||More than 100 000|
|Number of customers||More than 100 000|
|Number of trucks/targets||More than 100 000|
|Number of material types||More than 100 000|
|Data transferred via Cloud service via SIM card||Detailed data per bucket.
Weight, Material name, Target name, Customer name, Work order name
|Data transferred via USB||Detailed data per work order.
Start and stop times
Work order name, Total material loaded, Material type
|Data transferred in CareTrack||Tonnes/tons, Liter/gallon
Ton(ne)/hour, Ton(ne)/liter or gallon
Liter or gallon of fuel/ton(ne)
Number of cycles
Per time unit / customer / target / work order / material and task mode
|Operator manual||Accessible via touchscreen.
Available in 25 languages
|Calibration time||One 15-20 second calibration per day* or after changing attachment
|Printer / Type**||Thermal printer. Printouts can also be exported as pdf to USB
|Printer / Connectivity
|Printer / Information on printout
||Company name, Location, Address and phone number, Free text field
Date and time
Work order name
Total weight, Weight per compartment, Weight per material
|*Depending on working conditions | With Low Load Mode activated the system is not fully dynamic and has a lower accuracy