Use This Prestart Checklist to Keep Your Articulated Truck in Good Shape

A thorough equipment walkaround before starting a shift can make a big difference, and it doesn’t need to take a lot of time. Every good articulated truck operator should establish a daily routine of prestart checks. Regular machine upkeep can ensure safety, while improving productivity and uptime.

Here is a basic checklist I recommend your crews review each time before they operate an articulated truck.

External checks

• No external damage or defective/loose parts, especially tires, hoses and pipes.
• Wheels are not blocked.
• No visible leaks.
• Back-up camera and mirrors are clean and intact.
• Steering joint lock is disconnected.
• Engine hood, underbody skid plates and protective plates are closed.
• On-board weighing (only applies to machines without Full Suspension (FS): Cables/hoses are routed correctly, so that there is no risk of chafing.

 Internal checks

• All control lights turn on and gauges indicate readings.
• Work lights and headlights function properly.
• Fuel and (if applicable) AdBlue^®/DEF is sufficient.
• Items that keep you safe like mirrors, cameras, seatbelts and the safety lever.
• Retarder is working
• Steering system is free from clearance and noise.
• Fire suppression system is working.
• Service brake: Accumulated brake pressure in both circuits is normal.
• Parking brake can hold the machine at a standstill with throttle application up to 1,000 rpm (16.7 r/s).
• Dump function: run up the load body, check the stroke-end damping works, check the function MAX. dump height works if activated.

Another great way to stay on top of maintenance and keep your machines in good condition is using telematics. Check out this blog post on how telematics can help fleet managers and equipment owners spot operating errors that are hurting organizations’ bottom lines.