On-board Weighing
Make overloading, underloading, reweighing and waiting times a thing of the past! As an add-on to Load Assist, On-Board Weighing provides real-time insight into the bucket’s load. By measuring bucket load on the go, the dynamic system eliminates any disruption to the workflow.
Load ticket is a subscription-based digital service bought separately in Volvo Connect. It enables customers to streamline load-out tracking by automatically sending load tickets from machines equipped with the Volvo On-Board Weighing System to the office in real time. This reduces manual paperwork, minimizes errors, and simplifies invoicing.
- Real-time access to digital load tickets - no lost paperwork.
- Faster, more accurate invoicing with reduced admin work.
- Seamless integration with Volvo On-Board Weighing - no extra hardware needed.
Load Ticket is purchased separately as a subscription in Services Marketplace in Volvo Connect. Simply select the number of licenses needed for your fleet and follow the setup instructions. The service offers flexible monthly billing with the option to cancel anytime.
Take control of your productivity
On-board Weighing features
Getting started with On-Board Weighing has never been easier, thanks to Simple Mode. Accessed by entering a pin code, this simplified version limits the tool to three core functions: viewing of the current load in trip mode, the loaded weight and printing a simplified receipt.
The perfect solution when working with lightweight material, this function enables operators to weigh loads which are currently under the lower limit of the system, reducing the limit of the machine’s rated working load from 5% to 1%.
Tonnage measurements are accurate to within +/- 1% for every load. When site conditions or customer requirements make it impossible to lock the load within this margin, simply switch to within an accuracy of +/- 2%.
Select customer name and target tonnage with just a few touches. Managing the last bucket of the trip is easy with tip off capability.
Optimized for standard bucket operations, the system is also suitable for high tip buckets and side dump buckets, as well as compatible with forks and grapples (accuracy +/-2%). What’s more, operators will benefit from a guided calibration process.
Production data is stored in the Volvo Co-Pilot and can be exported over the air or by using a USB-stick. The system populates CareTrack combining productivity data and fuel data into a single report.
Task modes is an extra option bought separately where you can choose between four modes which will adapt the information displayed according to the task at hand: Trip Meter, Truck Loading, Stockpiling or Process Loading.
Specifications for On-board Weighing
| Machine availability | L60H, L70H, L90H, L110H, L120H, L150H, L180H, L200H HL, L220H, L260H, L350H |
| Type of system | Fully dynamic* |
| Typical accuracy | 1%* |
| Load range | Within the range of 5-150% of the machine working load |
| Load range - Low Load Mode | Within the range of 1-5% of the machine working load |
| Certifiable/trade approved | NO |
| Unit of measure | Tonnes, short tons and lbs |
| Task modes | Trip, Truck, Pile**, Process** |
| Loading multiple compartments | YES, up to 3 individual compartments |
| Tip-off functionality | Tip-off onto pile or tip-off onto truck |
| Pause functionality | YES |
| Rear-view camera, Radar detect system** | YES, when reversing only, OR at all times in full screen mode or split screen |
| Number of work orders | More than 100 000 |
| Number of attachments | More than 100 000 |
| Number of customers | More than 100 000 |
| Number of trucks/targets | More than 100 000 |
| Number of material types | More than 100 000 |
| Data transferred via Cloud service via SIM card | Detailed data per bucket. Weight, Material name, Target name, Customer name, Work order name |
| Data transferred via USB | Detailed data per work order. Start and stop times Work order name, Total material loaded, Material type Customer name |
| Data transferred in CareTrack | Tonnes/tons, Liter/gallon Ton(ne)/hour, Ton(ne)/liter or gallon Liter or gallon of fuel/ton(ne) Number of cycles |
| Load summary |
Per time unit / customer / target / work order / material and task mode |
| Operator manual | Accessible via touchscreen. Available in 25 languages |
| Calibration time | One 15-20 second calibration per day* or after changing attachment |
| Overload warning | Truck/target Bucket |
| Printer / Type** | Thermal printer. Printouts can also be exported as pdf to USB |
| Printer / Connectivity |
USB |
| Printer / Information on printout |
Company name, Location, Address and phone number, Free text field Date and time Customer name Work order name Target Total weight, Weight per compartment, Weight per material Bucket count |
| *Depending on working conditions | With Low Load Mode activated the system is not fully dynamic and has a lower accuracy **Optional equipment |
|
