+1-855-235-6014 Change market Find a dealer Login
Home Tools & Resources The Scoop Blog Tips for Cleaning and Disinfecting Construction Equipment Cabs
Blog

Tips for Cleaning and Disinfecting Construction Equipment Cabs

TIPS FOR CLEANING AND DISINFECTING CONSTRUCTION EQUIPMENT CABS

Enclosed spaces like cabs can harbor germs and viruses like the coronavirus — during times like this, cleanliness is incredibly important. Keeping surfaces disinfected is a responsibility for everyone to help keep each other protected.

At Volvo we are doing our part to help keep customers safe, and that now includes contactless sanitizing of cabs and touchpoints on all Volvo Certified Used and Volvo Inspected machines. It’s another level of assurance you receive when buying Volvo used equipment.

Below, I’ve explained the steps we take to sanitize every Volvo Certified Used or Volvo Inspected machine. These tips may be useful for your machines well — not just now, but any time.

  1. We use an EPA-approved disinfectant which is effective at deactivating the novel coronavirus and is safe for interiors. It won’t damage components in the interior of the cab like touch screens, switches and upholstery. Our VCU sanitizer is contactless, so no need to wipe after applying. There are many different types of products that can be used for your own equipment. Refer to the links below for a list of EPA-approved sanitizers.
  2. Sanitizing Construction EquipmentDisinfecting an equipment cab. When cleaning, be sure to use latex or synthetic rubber gloves and a mask or face covering. Typically, this step might get overlooked, but with a virus that can spread asymptomatically, this is the best way to ensure you’re not inadvertently re-infecting the surfaces while you’re cleaning them.
  3. Spray all exterior and interior handles and compartments. This includes floor mats, windows and hard surfaces as well as joysticks, steering wheel, knobs and any other touchpoints inside of the cab. Clean with detergent or soap and water if the surfaces are visibly dirty prior to disinfectant application.
  4. Cleaning the joystick inside of the cabCleaning the joystick inside of the cab. Be mindful when cleaning electronic consoles and display interfaces. An EPA-approved, contactless product may leave a film when it dries, but it’s not necessary to wipe it off once you achieve full coverage. You can also spray disinfectant on a microfiber cloth and wipe the displays and keypads.
  5. When addressing the upholstery, avoid using any products that contain bleach to prevent damage, and remember to wipe down the seat belts including the buckles.
  6. Spray all machine touchpoints including the dipstick, gas cap, engine access points, handles, latches, etc.
  7. Cleaning floorboards inside the cabCleaning floorboards inside the cab. If accessing the machine from the ground, be sure to spray all door handles and grab bars at the end of your cleaning.

The CDC has provided additional information on cleaning and disinfecting non-emergency transport vehicles that you may find beneficial as well. According to the CDC, for disinfection of hard, non-porous surfaces, appropriate disinfectants include:

    • EPA’s Registered Antimicrobial Products for Use Against Novel Coronavirus SARS-CoV-2, the virus that causes COVID-19. Follow the manufacturer’s instructions for concentration, application method and contact time for all cleaning and disinfection products.
    • Diluted household bleach solutions prepared according to the manufacturer’s label for disinfection, if appropriate for the surface. Follow manufacturer’s instructions for application and proper ventilation. Check to ensure the product is not past its expiration date. Never mix household bleach with ammonia or any other cleanser.
    • Alcohol solutions with at least 70% alcohol.

Tips for Cleaning and Disinfecting Construction Equipment CabsDownload Tips for Cleaning and Disinfecting Construction Equipment Cabs

Finally, we’re sending out a spray bottle of EPA-approved disinfectant with our Volvo Certified and Volvo Inspected used machines for use upon delivery. We take doing our part to help keep everyone healthy very seriously — and we hope you will, too. And remember, although we’ve taken these precautions to protect you against COVID-19, reinfection could take place at any time. Please take appropriate precautions every time you contact any surfaces or environment, and consult your operator’s manual for full details on general cab cleaning procedures and maintenance.

At Volvo we are doing our part to help keep customers safe, and that now includes contactless sanitizing of cabs and touchpoints on all Volvo Certified Used and Volvo Inspected machines. It’s another level of assurance you receive when buying Volvo used equipment.

Below, I’ve explained the steps we take to sanitize every Volvo Certified Used and Volvo Inspected machine. These tips may be useful for your machines as well — not just now, but any time.

Cab Sanitizing for Volvo Certified Used and Inspected Equipment

7 Steps to Sanitize Your Equipment Cab

About us Our history Career Innovation Sustainability Contact us Find a dealer Used equipment Government Sales Merchandise Facebook YouTube Instagram LinkedIn eNewsletters News Events & initiatives Volvo Construction Equipment stories Media The Scoop Blog www.volvogroup.com Copyright Privacy About cookies Contact us