Construction Equipment
Middle East
Steel. It’s hard to tell the difference just by looking at it, but there are actually thousands of different grades of steel. The Volvo Tooth System has an optimal specification and a high-end design for a premium performance in the toughest conditions – specifically made for your Volvo. We spend years of research and testing to produce the parts that make your Volvo deliver the highest productivity and profitability, over and over again.
Volvo Tooth System ensures that you are achieving the maximum capacity of your machine.The self-sharpening profile of each tooth is engineered to give you:
Volvo Tooth System is designed to withstand the extreme forces and wear that the bucket is exposed to when digging and loading. The teeth have the correct balance between hardness and high tension steel, which is the key to quality and long wear-life. The Volvo Tooth system also includes segments and wear caps in several sizes to extend the lifetime of your bucket and adapter. Volvo has a wide range of teeth, adapters and segments for Wheel loaders and Excavators.
IT FITS, BUT WILL IT DO THE JOB?
An all-rounder suitable for material for material with a moderate level of abrasion, such as sand and gravel. Small undercut makes it suitable for cleaning work. Designation: General Purpose Loader (GPL)
Designed to handle abrasive material, where extra penetration is required, such as crushed or blasted rock. Designation: Abrasive Material Loader (AML)
For heavy duty applications with a high level of abrasion, such as blasted rock or hot slag.Designation: Abrasive Material Rock Loader (AMRL)
Flush-mounting weld-on adapter. For use where a smooth profile to the bucket is required (eg planing, levelling). Designation: FC
Adapter with long top leg for welding to both sides of the cutting edge. Designation: TL
Two leg adapter for bolting to the cutting edge. Designation: BN
Designation: P
For general purpose applications with a moderate level of abrasion. Good penetration. Long service life. Designation: GPE.
Provides good penetration and longer service life in rock and abrasive material handling. For Rock material handling where extra wear life is needed. Designation: ARXE.
Adapter with long top leg for welding to both sides of the cutting edge. Designation: TL.
The perfect choice for extremely compact material, such as hard clay and frozen ground, providing maximum penetration capability. Can be used in combination with Twin Pick tooth. Long service life. Designation: PPC / PPE
The perfect choice for extremely compact material, such as hard clay and frozen ground, providing maximum penetration capability. Can be used in combination with Pick Point tooth. Long service life. Designation: TPC / TPE.
Works best for light-duty, low impact applications, such as levelling, cleaning, grading and backfilling. Designation: SNC / SNE.
Protecting adapter. Designation: W.
Designation: P.
Tooth for general purpose handling. Gives the bottom of the bucket a smooth and clean profile. Self sharpening. Available in size 10, 15, 20, 30, 40 and 55
Tooth for abrasive material handling and when extra penetration is needed. Undercuts slightly to give the cutting edge optimum protection. Self sharpening. Available in size 10, 15, 20 ,30, 40 and 55.
Tooth for abrasive material handling with extra large bottom surface on the wear shoe. Provides good penetration capacity in combination with long service life. Undercuts slightly to give the cutting edge optimal protection. Self sharpening. Available in size 15.
Tooth for abrasive material and rock handling with focus on long service life. Undercuts slightly to give the cutting edge optimum protection. Self sharpening. Available in size 20, 30, 40, 55 and 65.
Flush-mounted weld on adapter for loading and planning buckets. Gives the bottom of the bucket a smooth and clean profile in combination with GPL tooth. Available in size 10, 15, 20, 30, 40 and 55. NOT to be used in combination with segments!
[Two-leg bolt-on loader corner adapter. Provide good side cutter protection and help to reduce side cutter wear. Available in size 15, 20 and 30.
Gives the cutting edge optimum protection. Available in size 10, 15, 20 and 30. Should NOT be used in heavy duty applications.
Adapter that is welded on both sides of cutting edge. Available in sizes 10, 15, 20, 30, 40, 55 and 65. Should be used in heavy duty applications!
Protects the bucket edge between the adapter. Available in three size 30/40, 40 and 55.
Tooth for general purpose handling with good penetration and long service life. Self sharpening. Available in sizes 15, 20, 30, 40, 55, 65 and 80.
Tooth with extra wear material and longer service life. Self sharpening. Available in size 15, 20 and 30.
[Tooth with extra wear material and longer service life. Self sharpening. Available in size 40, 55, 65, 80 and 125.
Tooth for working in leveling, cleaning and grading. Available is size 15, 20, 30, 40, 55 and 65.
Tooth for work in extremely compact material. Can be used in combination with Twin Pick tooth. Available in size 15, 20, 30, 40, 55, 65 and 80.
Tooth for work in extremely compact material. Can be used in combination with PPE. Available in size 15, 20, 30, 40, 55, 65 and 80.
For welding on both sides of the cutting edge. Available in size 15, 20, 30, 40, 55, 65 and 80.
For welding on both sides of the cutting edge. Available in size 20, 30 and 55.
For welding on both sides of the cutting edge. Available in size 40, 55, 65, 80 and 125.
Available in size 40, 55, 65, 80 and 125.
Self sharpening. Available in size 5 and 8.
For work in extremely compact material. Can be used in combination with Twin Pick tooth. Available in size 8.
For work in extremely compact material. Can be used in combination with Pick Point tooth. Available in size 8.
For working in levelling, cleaning and grading. Available is size 8.
For loading and planning buckets. Available in size 5 & 8.
For welding on both sides of the cutting edge. Available in size 8.
Available in size 5.