Construction Equipment Middle East
Teeth

Volvo Tooth System

It fits, but will it do the job?

Stay genuine - Genuine Volvo Parts

Steel. It’s hard to tell the difference just by looking at it, but there are actually thousands of different grades of steel. The Volvo Tooth System has an optimal specification and a high-end design for a premium performance in the toughest conditions – specifically made for your Volvo. We spend years of research and testing to produce the parts that make your Volvo deliver the highest productivity and profitability, over and over again. 

Maximized productivity

Volvo Tooth System ensures that you are achieving the maximum capacity of your machine.The self-sharpening profile of each tooth is engineered to give you: 

  • Improved penetration capability
  • Improved bucket fill
  • Less bucket wear
  • Lower maintenance cost
  • Less fuel consumption
  • Improved productivity
Why choose Volvo Tooth System?

Volvo Tooth System is designed to withstand the extreme forces and wear that the bucket is exposed to when digging and loading. The teeth have the correct balance between hardness and high tension steel, which is the key to quality and long wear-life. The Volvo Tooth system also includes segments and wear caps in several sizes to extend the lifetime of your bucket and adapter. Volvo has a wide range of teeth, adapters and segments for Wheel loaders and Excavators. 

  • Excavator: from 1.5 up to 95 tonnes.
  • Wheel loaders: from L20 up to L350. 
Fit the right teeth: save time and money
  • Planning your teeth change will allow you to minimise disruption to productivity.
  • The Volvo Teeth are designed to have the right material where it matters the most, for example the Wheel loader teeth are reinforced underneath to withstand extreme wear.
  • The unique vertical locking device makes it quicker, easier and safer to change teeth. 
  • Exceptional fit between tooth and adapter provides a strong unit to withstand high forces and stress. 

Teeth on excavator buckets

Volvo dealer finder home
Know what you need?

Want to order parts? We will be happy to help you.

Make a request

Teeth, adapters and segments for Wheel loader buckets

General Purpose tooth

Tooth for general purpose handling. Gives the bottom of the bucket a smooth and clean profile. Self sharpening. Available in size 10, 15, 20, 30, 40 and 55

Abrasive Material tooth

Tooth for abrasive material handling and when extra penetration is needed. Undercuts slightly to give the cutting edge optimum protection. Self sharpening. Available in size 10, 15, 20 ,30, 40 and 55.

Extra wide abrasive material tooth

Tooth for abrasive material handling with extra large bottom surface on the wear shoe. Provides good penetration capacity in combination with long service life. Undercuts slightly to give the cutting edge optimal protection. Self sharpening. Available in size 15.

Rock and abrasive material tooth

Tooth for abrasive material and rock handling with focus on long service life. Undercuts slightly to give the cutting edge optimum protection. Self sharpening. Available in size 20, 30, 40, 55 and 65.

Flush adapter

Flush-mounted weld on adapter for loading and planning buckets. Gives the bottom of the bucket a smooth and clean profile in combination with GPL tooth. Available in size 10, 15, 20, 30, 40 and 55. NOT to be used in combination with segments!

Bolt-on corner adapter

[Two-leg bolt-on loader corner adapter. Provide good side cutter protection and help to reduce side cutter wear. Available in size 15, 20 and 30.

Bolt-on adapter

Gives the cutting edge optimum protection. Available in size 10, 15, 20 and 30. Should NOT be used in heavy duty applications.

Top Leg adapter

Adapter that is welded on both sides of cutting edge. Available in sizes 10, 15, 20, 30, 40, 55 and 65. Should be used in heavy duty applications!

Bolt-on segment

Protects the bucket edge between the adapter. Available in three size 30/40, 40 and 55.

Teeth, adapters and segments for Excavator buckets

General Purpose tooth

Tooth for general purpose handling with good penetration and long service life. Self sharpening. Available in sizes 15, 20, 30, 40, 55, 65 and 80.

Abrasive material and rock handling tooth

Tooth with extra wear material and longer service life. Self sharpening. Available in size 15, 20 and 30.

Abrasive material tooth with extra wear metal

[Tooth with extra wear material and longer service life. Self sharpening. Available in size 40, 55, 65, 80 and 125.

Spade nose tooth

Tooth for working in leveling, cleaning and grading. Available is size 15, 20, 30, 40, 55 and 65.

Pick point tooth

Tooth for work in extremely compact material. Can be used in combination with Twin Pick tooth. Available in size 15, 20, 30, 40, 55, 65 and 80.

Excavator Twin Pick tooth

Tooth for work in extremely compact material. Can be used in combination with PPE. Available in size 15, 20, 30, 40, 55, 65 and 80.

Bottom leg adapter

For welding on both sides of the cutting edge. Available in size 15, 20, 30, 40, 55, 65 and 80.

Bottom leg adapater with extra long upper leg

For welding on both sides of the cutting edge. Available in size 20, 30 and 55.

Bottom leg adapter for wear cap

For welding on both sides of the cutting edge. Available in size 40, 55, 65, 80 and 125.

Excavator wear cap

Available in size 40, 55, 65, 80 and 125.

Teeth, adapters and segments for Compact buckets

Tooth for general purpose handling

Self sharpening. Available in size 5 and 8.

Pick Point tooth

For work in extremely compact material. Can be used in combination with Twin Pick tooth. Available in size 8.

Twin Pick tooth

For work in extremely compact material. Can be used in combination with Pick Point tooth. Available in size 8.

Spade Nose tooth

For working in levelling, cleaning and grading. Available is size 8.

Flush-mounted weld on adapter

For loading and planning buckets. Available in size 5 & 8.

Bottom Leg adapter

For welding on both sides of the cutting edge. Available in size 8.

Bottom Leg Universal adapter

Available in size 5. 

Volvo dealer finder home
Know what you need?

Want to order parts? We will be happy to help you.

Make a request