The European introduction of Stage IIIB compliant EC380D and EC480D tracked excavators sees Volvo enter a new era of low emissions and high productivity.
Part of the new generation D-Series excavators, Volvo Construction Equipment (Volvo CE) is offering European customers two heavyweight production machines, ranging in weight classes between 38-50.5 tonnes. Meeting the strict requirements of new European emissions legislation, the powerful and reliable EC380D and EC480D excel in heavy digging and lifting duties, offering superior cycle times and greater fuel efficiency.
The D-Series offers more powerful Stage IIIB-compliant D13-T4(A) Volvo engines, delivering lower emissions and exemplary fuel efficiency. These engines work in harmony with intelligent, advanced hydraulics and features a more rugged undercarriage. But that is only half the story…
Built for heavy production duties such as trenching, loading, moving rocks or general construction, the EC380D and EC480D deliver dependable power with high torque, along with lower emissions, fuel consumption and noise.
At the heart of these machines is a turbocharged high pressure direct injection Volvo diesel engine that offers maximum power of 208 kW (EC380D) and 245 kW respectively. Both machines feature an automatic idling system that reduces engine speed when the levers and pedals are not activated – aiding fuel efficiency and lowering external noise.
When only a single function is being used, the two pump hydraulics system combines the flow of both pumps for quick cycle times and greater productivity. It can also prioritize flow according to the work being done – e.g. to the boom for faster raising when loading or in deep excavations; to the arm during leveling or swing during large slewing angles.
‘Heavy duty’ is the best way to sum up the EC380D and EC480D, offering durability in the toughest working conditions. The undercarriage is made from thick gauge, high strength tensile steel, the sprocket and top rollers are made from forged steel and deep hardened for long term durability. Bottom rollers feature extreme pressure (EP) oil, reducing the oil temperature and ensuring consistent viscosity, even under heavy loads. Durable three-stage planetary gearboxes and automatic two-speed track motors are used, while improved performance over difficult or steep terrain is evident due to increased tractive force. The larger EC480D features mechanical variable width tracks, which extend the width by 150 mm and raise clearance by 196 mm, aiding stability and protection.
Heavy duty booms are standard on these machines, and high strength tensile steel arms provide durability in severe applications. Wear strips welded to the inside of the arm give added protection and the linkage yoke features a support bar for additional strength. The optional Boom Float function lowers the boom using gravity only, freeing up hydraulic flow for other duties.
The operator can select the work mode, settings and attachment requirements all from inside the cab. Five working modes (Idle, Fine, General, Heavy and Power-Max) allow operators to quickly select the best mode for the job at hand. This automatically tailors the performance and ensures the best fuel efficiency. Up to 18 different attachments can also be managed, tailoring hydraulic flow and (as an option) pressure according to the specific requirements of the tool being used.
Using the latest version of Volvo’s ROPS-protected Care Cab, operators sit in a roomy, low fatigue, air conditioned working environment, with clear visibility and controls that fall easily to hand. A large, clear colour monitor gives operators all the important machine information, while a service mode allows technicians to perform diagnostic checks. The monitor can also display the view from the rear facing camera.
Both the EC380D and EC480D feature easy maintenance. Accessed via wide opening compartment doors, grouped, ground level filters and service points are simpler and safer to get to. Checks are done quicker, further improving uptime, while a reversible cooling fan is operated from the cab and helps prevent radiators clogging and overheating problems.
These machines come fitted as standard with CareTrack, Volvo CE’s telematic system. Accessed remotely, CareTrack provides machine information such as fuel consumption and service reminders that allow improved planning and operation. A comprehensive range of service plans are also available from Volvo’s dedicated dealer network, ranging from routine wear inspections to full service agreements and Eco operator training.
|Engine||Volvo D13-T4(A)||Volvo D13-T4(A)|
at 1,700 r/min, net
|208 kW (279 hp)||245 kW (333 hp)|
|Max. lifting capacity along
|16,130 kg (35,500 lb)||19,000 kg (41,800 lb)|
|Max. digging reach||11.72 m (38.45 ft)
(6.45 m boom / 3.9 m arm)
|13.26 m (43.5 ft)
(7 m boom/4.8m arm)
|Max. digging depth||8.15 m (26.74 ft)
(6.45 m boom / 3.9 m arm)
|9.06 m (29.72 ft)
(7 m boom/4.8m arm)
|Max. Breakout force – bucket
(Normal / Power boost)
|243 / 265.4 kN||285 / 310.6 kN|
|Operating weight||38.0 – 39.4t
(83,780 – 86,860 lb)
|47.9 – 50.5 t
(105,600- 111,300 lb)
Director, External Communications
Volvo Construction Equipment