Construction Equipment GLOBAL

Volvo cleans up in the 1.5t to 2t compact excavator class

The introduction of the EC15C, EC17C, EC18C and EC20C provides an improved and expanded range of compact excavators in the 1.5 to 2 tonne class.

The all-new EC15C, EC17C, EC18C and EC20C compact excavators from Volvo Construction Equipment set new standards of quality, technological innovation and value in the 1.5t to 2t class. Available in European, North American and International markets from April, the new models are powered by a 12.3 kW (16.8 hp) diesel engine. They include hydraulic hoses routed in the boom as well as rear protection. The new models replace the EC15B in XR, XT and XTV variants and the EC20B in XT and XTV variants.

The entry level excavator in the new range is the EC15C. With a maximum operating weight of 1,540 kg, this open canopy model can be transported by a light vehicle. Built to access the smallest of job sites, it has a maximum digging depth of between 2.1-2.3 m and a bucket breakout force of 1,143 daN. 

The 1,650kg EC17C is fitted with the same fixed displacement 31 litre/min hydraulic gear pump as the EC15C but has a higher specification cab. The EC18C shares the same dimensions as the EC17C but is fitted with a 44 litre/min variable displacement hydraulic pump for increased performance and versatility. Able to operate a wider range of attachments, the EC18C has been purpose developed to meet the demands of rental customers, owner operators and specialist contractors.

The range topping EC20C is offered in both canopy and cab versions with respective operating weights of 1,850kg and 1,940kg. Like the EC18C, it can be specified with a variable width undercarriage. This allows the compact operating width of 994 mm to be increased to a wide and stable 1,336 mm.

Cab and controls

Both cab and canopy excavators meet or exceed TOPS, ROPS and OPG1 standards of protection. Extensive cab glazing with narrow cab pillars and a compact rear design enhance all-round visibility.

The operator can use an electro-proportional roller on the joystick to slew and offset movements at the same time. This enables these new C-series excavators to deliver faster and more precise performance. The attachment circuit and offset function foot controls have now moved to a button on the right joystick – providing operators with more leg and foot room. A new instrument panel provides comprehensive information on all key operating functions.

All models have a cast steel boom end and a cast iron arm end. Key hydraulic hoses are routed through the boom for optimum protection, with the rear counterweight acting as protection for the rear of the machine.

Ease of operation is another design feature. As an example, the travel speed will automatically shift from high to low according to load. This ensures optimum productivity and traction is retained when operating over steep terrain or in difficult conditions. It also ensures productivity can be maintained when conducting levelling work or backfilling. 

A wide range of Volvo CE approved accessories are also available. 

Other key Volvo EC15C/17C/18C/20C features:

Performance: EC15C and EC17C fitted with single high efficiency pump for all hydraulics. Variable displacement pump automatically adjusts oil flow to meet demand. Rounded profile dozer blade offer extended reach for optimum grading performance. 

Protection and economy: EC15C, EC17C and EC18C boom cylinder positioned above the boom for added protection. Flat cab windows can be replaced quickly and more economically than curved glass.

Operating efficiency: EC18C and EC20C feature load-sensing hydraulic system for fast cycle times, even when carrying out multiple functions. All models have a simplified hydraulic level check with in-built diagnostic system. Three lift/securing points in-built for easy lift and transport. 

Operator comfort: Full size hydraulic travel pedals for comfort and operating precision. Digital hour meter shows total engine running hours that can be viewed from outside the cab without starting the engine. Sliding side and upper windows can be opened for ventilation or allow communication with third parties. Purpose designed anti-vibration cab mounts.

Safe operation: High performance halogen work lights (canopy version: 1; cab version: 2). Self-adjusting inertia seat belt.

Serviceability: Single-piece engine hood provides unobstructed service access. Instrument panel provides at-a-glance monitoring of all key functions. Cab floor panel lifts for access to hydraulics and main control valve. Flat floor is easy to clean.

Quick Specifications:

 

EC15C

EC17C

EC18C

EC20C

Max dig depth

Arm 950 mm : 2120 mm
Arm 1,150 mm : 2323 mm

Arm 950 mm : 2120 mm
Arm 1,150 mm : 2323 mm

Arm 950 mm : 2120 mm
Arm 1,150 mm : 2323 mm

Arm 1050 mm 2257 mm
Arm 1,350 mm : 2557 mm

Operating weight

Canopy: 1,540 kg (3,395 lbs)

Cabin: 1,650 kg (3,638 lbs)

Cabin: 1,760 kg (3,880 lbs)

Cabin: 1,940 kg (4,276 lbs)

Rated engine power:
According with DIN/ISO Std 3046/1

12.3 kW
(16.8 hp)
@ 2,000 rpm

12.3 kW
(16.8 hp)
@ 2,000 rpm

12.3 kW
(16.8 hp)
@ 2,000 rpm

12.3 kW
(16.8 hp)
@ 2,000 rpm

Rated engine power:
According with
SAE Std 3046/1

11.9 kW
(16.2 hp)
@ 2,000 rpm

11.9 kW
(16.2 hp)
@ 2,000 rpm

11.9 kW
(16.2 hp)
@ 2,000 rpm

11.9 kW
(16.2 hp)
@ 2,000 rpm

Track width

230 mm

230 mm

230 mm

250 mm

Breakout force

1,143 daN
(2,540 lbf)

1,143 daN
(2,540 lbf)

1,143 daN
(2,540 lbf)

1,644 daN
(3,653 lbf)

Tear-out force

800 daN
(Short arm)

800 daN
(Short arm)

800 daN
(Short arm)

1239 daN
(Short arm)

FOR FURTHER INFORMATION

Tiffany Cheng

Director, External Communications
Volvo Construction Equipment
E-mail: tiffany.cheng@volvo.com

Brian O'Sullivan

SE10
London
Tel: +44 7733350307
E-mail: osullivan@se10.com