Construction Equipment
Europe
A wide range of Loader buckets to be used in a large variety of soil conditions and for all rehandling, load & carry, leveling or tunneling jobs.
The perfect fit for handling, stockpiling and loading processed material. Optimized for applications requiring moderate break-out force. Achieve the highest possible machine performance in both short cycle and load and carry applications. Available with optional bolt-on edge.
Available for: L110H, L120H, L150H, L180H, L220H, L260H, L350H
Details
The best choice for handling, stockpiling and loading processed material, such as sand, gravel and aggregate. Optimized for soft underfoot conditions. Maximize traction and break-out force, while maintaining a clean and level work area for unbeatable productivity and efficiency. Available with optional bolt-on edge.
Available for: L110H, L120H, L150H, L180H, L220H, L260H
Details
Optimized for handling sand or aggregate in small fractions, making it the ideal choice for soft underfoot conditions. The long bucket floor maximizes penetration for improved traction and its flat design helps to maintain a clean and level work area. Available with optional bolt-on edge.
Available for: L150H, L180H, L220H, L260H
Details
The best all-round bucket. When fitted with bolt-on edges it works well handling loose material and aggregates in both short cycle and load and carry operations. When fitted with welded teeth options and segments, it is the best choice for loading easily broken material from banks.
Available for: L110H, L120H, L45H, L50H, L60H, L70H, L90H
Details
The best choice for all-round efficiency. The bucket is primarily intended for use in low-impact operations, with moderately abrasive materials such as dirt, loam, gravel, and clay. Reflective stickers boost visibility for quick and easy filling. Reinforced with wear resistant steel HB400 and HB500. Can be equipped with bolt-on edges, welded teeth options and segments.
Available for: L110H, L120H, L150H, L180H, L220H, L260H, L350H, L60H, L70H, L90H
Details
Optimized for soft underfoot conditions and earth moving applications such as landscaping, stripping topsoil and grading. The smart bucket design offers maximum traction and break-out force, while maintaining a clean and level work area. Volvo recommends fitting your bucket with flush adapters and GP points.
Available for: L110H, L120H, L60H, L70H, L90H
Details
The grading bucket has a long flat bottom. It is intended for earthmoving work such as topsoil stripping, small scale dozing, landscaping and levelling of fill. An edge is provided on the back side for grading when the machine is reversed.
Available for: L110H, L120H, L45H, L50H, L60H, L70H, L90H
Details
The best choice for breaking-out hard and stony material and shot rock. Recommended to be fitted with 1 1/2 leg adapters, teeth (GP or AM) and segments. For gravel, fine shot rock and ore, it can be fitted with a bolt-on edge or teeth.
Available for: L110H, L120H, L150H, L180H, L220H, L260H, L350H, L60H, L70H, L90H
Details
Heavy-duty, wear resistant bucket. Optimized for loading shot rock or easily broken material from a bank with high break-out capability. When fitted with welded teeth options and segments, it is the best choice for loading easily broken material from a bank.
Available for: L110H, L120H, L150H, L180H, L220H, L260H, L350H
Details
Side dump rock buckets are designed for rock loading in tight locations like tunnels. The design makes it possible to load parallel with the truck by dumping the bucket sideways. This way of loading requires less space and is frequently used in tunnelling applications. The bucket is normally equipped with abrasive material rock teeth, 1 1/2 leg adapters and casted segments but can also be equipped with a bolt-on edge.
Available for: L150H, L180H, L220H, L260H, L350H
Details
The Volvo high tip light material bucket has high capacity for handling low density materials such as compost, refuse, coal etc. The high tip bucket features an increased dump height over standard light material buckets as it is hydraulically lifted from a built-in frame.
Available for: L110H, L120H, L150H, L180H, L220H, L30G, L35G, L60H, L70H, L90H
Details
Specifically intended for waste and recycling applications, this bucket provides the extra height required to reach high load receivers. The side-mounted horizontal cylinders enable smooth tilting and easy dumping, while perfectly protected hydraulic hoses contribute to long-lasting performance. Compatible with all boom types and Volvo interfaces. Standard bolt-on edge.
Available for: L110H, L120H, L60H, L70H, L90H
Details
The bucket is optimized for waste handling at a transfer station. With an extra-long floor and heavy-duty design, this bucket is ideal in push floor operations for both pushing the material to and packing (tamping) it in the container.
Available for: L110H, L120H, L150H, L180H, L220H, L90H
Details
The bucket is optimized for waste handling at a transfer station. With an extra-long floor and heavy-duty design, this bucket is ideal in push floor operations for both pushing the material to and packing (tamping) it in the container. The clamp arms enable the operator to push approximately 25% more material per load as well as remove material from the truck or container. A third hydraulic function is required to operate the bucket.
Available for: L110H, L120H, L150H, L180H, L220H, L90H
DetailsThe attachment design may vary depending on machine model.
