Certifiable On-board Weighing

When weight equals revenue, unofficial data isn’t enough. Certifiable On-board Weighing provides you with type-approved, Legal-for-Trade weight measurements directly from your Volvo wheel loader, with no dependency on weighbridges or third-party weighing systems. One supplier. One integrated solution designed for quarry, construction and material handling operations.

Contact us

Benefit from Legal-for-Trade accuracy

Invoice and trade using certified Legal-for-Trade weight data. The system is sealed and tamper-protected, with advanced sensors and intelligent software that compensate for machine movement, tilt and operating conditions.

Remove dependency on weighbridges

Your loader becomes the certified weighing point, so you can remove other weighing systems from your operation entirely. This can eliminate truck queueing, support reduced fuel consumption and minimize machine wear.

Simplify operations

When combined with Load Ticket, Certifiable On-board Weighing transfers certified weight data digitally and generates digital load documentation that supports reporting and invoicing workflows. This can improve traceability and reduce disputes.

Weigh, document, invoice

Certifiable On-board Weighing captures the certified weight of each load, and Load Ticket* automatically turns that data into documentation and billing. When combined, the systems transfer certified weight data digitally at the point of loading and generate a digital load ticket for each cycle.

The data goes straight to your office systems, giving your team instant access to verified records for reporting and invoicing. The result is a complete, traceable workflow from first bucket to final invoice, built into the machine you already operate.

*Load Ticket is a subscription-based digital service, available separately in Volvo Connect.

How it works

Certifiable On-board Weighing is built into your machine and runs through the existing Volvo Co-Pilot interface. No additional screens, no separate systems. From the moment loading begins, the system measures, certifies, and records weight data.

During the loading cycle, our Certifiable On-board Weighing system uses advanced sensors to measure material weight and advanced software compensates for machine movement, tilt and operating conditions. This means the system can deliver reliable weight readings, even when the machine is in motion. The result is a complete, accurate weight measurement captured during the load cycle itself, with no interruption to productivity.

The Certified Load Unit (CLU) handles calculations and memory storage in the system, and ensures measurement accuracy, data integrity and security in line with OIML R51 and MID requirements. This is what gives the system its legal standing, making the weight data officially approved for commercial transactions.

Data shows up instantly on the Volvo Co-Pilot touchscreen interface. No extra screen required in the cab, as the system is fully integrated into the existing operator interface. This means operators can monitor loading progress and avoid underloading or overloading.

When combined with our Load Ticket service, Certified On-board Weighing automatically transfers certified weight data and generates a digital ticket for each load. The system then sends data directly to your office systems for reporting and billing, with Cloud access for office documentation. This can reduce manual paperwork and the administrative workload. The full chain – from certified weight to digital documentation for invoicing – is completed without manual paperwork.

Suitable applications

Quarry & mining

In mining and quarry operations, trucks must queue at the weighbridge, which creates a bottleneck. Certifiable On-board Weighing shifts the weighing point to the loader itself, meaning trucks leave with a verified weight and a digital ticket already generated. Fewer stops, fewer disputes, and nothing to process manually.

Construction

At temporary construction sites, there is no weighbridge available. Loads are estimated instead of accurately measured, time is spent on manual documentation, and disputes between contractors and clients are hard to resolve without a verified record. Certifiable On-board Weighing addresses this by providing certified weight and digital documentation at the point of loading.

Ports & material terminals

At ports and material terminals, bulk material moves fast – but the documentation often can't keep up. Certifiable On-board Weighing captures certified weight data during loading, supporting documentation requirements without adding a separate process to an already complex workflow.

Recycling operations

In recycling operations, weight is revenue, and disputes about weight are disputes about money. Certifiable On-board Weighing supports accurate, traceable weight capture at the point of loading, giving operators a verifiable basis for invoicing that's harder to dispute.

Material handling

On material handling sites, the weighbridge creates friction in the cycle – trucks queue, loading slows, and delays accumulate. Certifiable On-board Weighing certifies weight during loading, so trucks can turn around faster and certified data flows directly into invoicing and reporting workflows.

Certifiable On-board Weighing features

Every component in Certifiable On-board Weighing is designed to work together as a single, integrated system. From the sensors that capture weight during loading, to the software that certifies and records it.

LFT is type-approved by an independent notified body in accordance with OIML R51 and aligned with EU MID requirements (Directive 2014/32/EU). This means the weight data produced by Certifiable On-board Weighing carries the same legal standing as a certified weighbridge.

The data is legally approved for invoicing, billing and commercial transactions, allowing you to meet strict regulatory standards for accuracy, data integrity and security. You can order eligible Volvo wheel loaders C-OBW-ready or prepared through the applicable retrofit solution. Final Legal-for-Trade certification is performed after delivery by an authorized notified or certified body.

Certifiable On-board Weighing uses inertial measurement units (IMUs) and hydraulic pressure sensors to measure material weight during the loading cycle. Intelligent software compensates for machine movement, tilt and operating conditions in real time, ensuring accurate readings even when the machine is in motion or operating on uneven ground.

This means you get accurate weight measurements without needing to stop the machine or interrupt the load cycle, and reliable performance across varying terrain and operating conditions.

The CLU is a key component of the Certifiable On-board Weighing system and handles weight calculations and secure memory storage as part of the Legal-for-Trade solution. It operates in line with OIML R51 and MID requirements, which means you get measurement accuracy and data integrity throughout the system, tamper-protection to maintain the legal standing of the weight data, and a secure, auditable record of every load for compliance purposes.

Certifiable On-board Weighing runs entirely through the existing Volvo Co-Pilot touchscreen interface – no additional screen required in the cab. Operators can access weight data, monitor loading progress, and receive alerts through the same interface they already use for other Load Assist functions. This means operators can work with a familiar, uncluttered interface, and you can reduce operator training requirements as the system integrates into existing workflows.

The Volvo Co-Pilot touchscreen displays weight data instantly as the loading cycle progresses. Operators can monitor the current load in real time and adjust accordingly before the cycle is complete – avoiding both underloading and overloading. This solution also gives operators immediate visibility into load status, which supports faster decision-making and can reduce the need for re-weighing or correction cycles.

The system monitors measurement quality and notifies operators of any issues or weighing discrepancies through the Co-Pilot interface. Alerts flag conditions that may affect the accuracy or integrity of the weight reading, allowing operators to act immediately when the system detects a weighing issue. This can prevent inaccurate data from reaching billing.

The system stores weight information for every load cycle, creating a running record of weight data that can be reviewed and used for reporting, tracking and compliance purposes. When combined with Load Ticket, this data is automatically copied to office systems – providing you with a complete, traceable record of every load for auditing and compliance.

This can support reporting and billing with accurate, documented historical data and contribute to reduced administrative workload by replacing manual record-keeping with automated data capture.

Certifiable On-board Weighing is designed and built to perform reliably in the harsh operating conditions typical of quarry, construction and material handling environments – including extreme temperatures, dust, vibration and heavy use. This means you can benefit from consistent performance in demanding conditions, which in turn can support reduced downtime and unplanned maintenance.

The system is compatible with various buckets used with Volvo wheel loaders. Certified bodies perform calibration with the application buckets as part of the certification process, ensuring accurate weight readings across different configurations. This gives you the flexibility to work across different site requirements and material types without changing systems.

Questions & answers

Certifiable On-board Weighing is a fully integrated weighing system for Volvo wheel loaders. It generates Legal-for-Trade certified weight data directly during the loading cycle, with no weighbridge required. The system displays real-time weight data on the Volvo Co-Pilot touchscreen, giving your operators accurate load information on every cycle. Once verified by an authorized body, the weight data carries full legal standing for commercial transactions, invoicing, and regulatory compliance.

The system weighs material directly during the loading cycle – no stopping, no separate weighing step. It automatically accounts for movement and tilt to deliver accurate weight readings in real time, displayed on the Volvo Co-Pilot touchscreen. Once your Volvo dealer has completed the installation and an authorized body has verified the system, it is sealed and tamper-protected, and the weight data it produces carries full Legal-for-Trade standing.

Your Volvo dealer manages the full certification process – from installation and calibration to coordinating with an authorized verification body. Once the system passes verification, it is sealed and tamper-protected, and the weight data it produces carries full Legal-for-Trade standing.

Re-certification is required at regular intervals, typically annually. As the machine owner, you are responsible for ensuring ongoing compliance with local regulations. Your Volvo dealer can advise on the requirements in your market.

Certifiable On-board Weighing is compatible with selected Volvo wheel loader models, including some older machines already running On-board Weighing. Your Volvo dealer can confirm whether your specific model and configuration qualifies.

Your local Volvo dealer can support you throughout the process, from determining machine compatibility and installation to setup, calibration and preparation for Legal-for-Trade verification. Operating guidance is also available to help you get the most from Certifiable On-board Weighing.

Certifiable On-board Weighing requires no special maintenance under normal operating conditions. Regular machine software updates – including Volvo Co-Pilot updates – are unaffected by the certification and can be carried out as normal.

Software updates specific to the Certifiable On-board Weighing components are blocked by default to protect the sealed system. A Volvo service technician can unblock these updates when needed. We recommend that these updates are done at the time of your scheduled re-certification to minimize any interruption to your operation.

If a component failure requires parts to be replaced, the seal will be broken, and the machine will need to undergo re-certification. Your Volvo dealer can advise on the appropriate next steps if this occurs.

Please contact your local Volvo dealer to check machine compatibility, service availability and the applicable Legal-for-Trade requirements in your market. Your dealer will guide you through the ordering, installation and certification process.

Yes, Certifiable On-board Weighing requires additional hardware installation. If your machine already runs On-board Weighing, it can use the existing system components together with new dedicated hardware for Certifiable On-board Weighing. Hardware requirements vary depending on your machine's configuration and market. Your Volvo dealer can confirm exactly what is needed for your setup.

Your Volvo dealer confirms machine compatibility, installs and prepares the required hardware and software, and supports calibration ahead of Legal-for-Trade verification. An authorized body then performs the final verification and sealing in line with the applicable requirements in your market.

Discover more services

Our offering Products Customized equipment Services Industry solutions Used equipment Volvo CE Marketplace Merchandise Company information Contact Events & activities News Press room This is Volvo CE Quick links Calculators & tools Guides & advice Corporate site Volvo Connect © AB Volvo 2026 www.volvogroup.com Copyright Cookies Privacy policy