On-board Weighing or Certifiable On-board Weighing – What’s the difference, and which one is right for you?
What is On-board Weighing?
On-board Weighing is an add-on to Load Assist that gives operators real-time insight into the weight of each bucket load as they work. The system uses inertial measurement units and hydraulic pressure sensors to dynamically measure load weight, without stopping the machine or interrupting the loading cycle. Weight data is displayed directly on the Volvo Co-Pilot touchscreen, which allows operators to optimize each load, avoid underloading or overloading, and keep the operation moving.
Typical accuracy is within +/-1%, and the system supports a wide range of task modes, attachments, and bucket types. Production data is stored in Volvo Co-Pilot and can be synced with CareTrack for combined productivity and fuel reporting.
What is Certifiable On-board Weighing?
Certifiable On-board Weighing has a dedicated hardware component – the Certified Load Unit (CLU) – and additional sensors that enable the system to meet the requirements for Legal-for-Trade certification.
Once verified by an authorized, notified, or certified body, the system is sealed and tamper-protected, and the weight data it produces carries the same legal standing as that of a certified weighbridge. The system is developed and type-approved in accordance with OIML R51 and the EU MID Directive 2014/32/EU, and the weight accuracy is also validated in line with this standard.
Certifiable On-board Weighing can be paired with Volvo Load Ticket, our digital load documentation service. Together, they record certified weight data, generate digital load documentation at the point of loading, and make it available to back-office teams through the cloud. This digitalized process helps support efficient invoicing and documentation workflows.
What is the main difference between Certifiable On-board Weighing and On-board Weighing?
The main difference is the legal standing of the recorded weight. On-board Weighing provides accurate weight data for operational use, which allows operators to optimize loads, track production, and avoid overloading. The weight data captured by On-board Weighing is for internal purposes only.
Certifiable On-board Weighing produces weight data that, after verification, is legally approved for commercial transactions. If a customer, contractor, or regulator needs to rely on that weight figure for an invoice, a tender, a compliance record, or a dispute, only Certifiable On-board Weighing can provide it.
Which one is right for you?
On-board Weighing is the right choice if you:
- Need accurate, real-time load data to optimize productivity and avoid overloading.
- Use weight data for internal tracking, production reporting, or fleet management.
- Do not need weight data for external invoicing or commercial transactions.
- Are looking for a cost-effective solution with no certification process required.
Certifiable On-board Weighing is the right choice if you:
- Invoice customers based on tonnage and need legally approved weight data to do so.
- Operate in an industry or region where Legal-for-Trade compliance is required.
- Want to remove the weighbridge dependency from your operation entirely.
- Need a verifiable, tamper-proof record of every load for compliance, tenders, or dispute resolution.
- Need digital load documentation generated automatically at the point of loading.
As a general rule, if weight equals revenue, Certifiable On-board Weighing is the right choice for your operations. Please note that certification activities, approvals, and verification processes vary by country and market, and are subject to local regulations.
| Certifiable On-board Weighing | On-board Weighing | ||
|---|---|---|---|
|
Primary purpose |
Legal-for-Trade-compliant weighing, aligned with multiple global standards |
Load optimization and productivity |
|
|
Weight accuracy |
+/-1% accuracy Certified accuracy for commercial use |
+/-1% accuracy High accuracy for operational control |
|
|
Legal-for-Trade capability |
Yes, Legal-for-Trade weighing is available after verification by a notified body |
No, non-certified weight that is not Legal-for-Trade approved |
|
|
Typical use case |
Billing, invoicing and regulatory compliance |
Optimizing loading, avoiding overloading |
|
|
Data security |
Yes. Secure, tamper-proof data handling |
Standard system protection |
|
|
Error alerts |
Yes, error alerts for weighing discrepancies |
Basic system notifications |
|
|
Integration |
Integrated via Load Assist |
||
|
Operator interface |
Volvo Co-Pilot touchscreen |
||
|
Third-party hardware |
Not required |
||
|
Prerequisites |
Volvo Co-Pilot 2nd Generation or Integrated Co-Pilot only On-board Weighing hardware + Certifiable On-board Weighing hardware (AMO kit or factory-fit) |
Any Volvo Co-Pilot generation On-board Weighing sensors and wiring Load Assist + On-board Weighing software |
|
|
Ideal for |
Customers requiring certified weight data |
Customers focused on productivity and efficiency |
|