A wide range of Loader buckets to be used in a large variety of soil conditions and for all rehandling, load & carry, leveling or tunneling jobs.
Volvo Rehandling buckets are the perfect choice for handling medium-sized processed material, no matter if you are doing truck loading, loading crusher/screener, stockpiling or a load and carry task. The Straight edge variant ensures the highest levels of break-out force and dump clearance. Available with optional bolt-on edge.
The best choice for handling, stockpiling and loading processed material, such as sand, gravel and aggregate. Optimized for soft underfoot conditions. Maximize traction and break-out force, while maintaining a clean and level work area for unbeatable productivity and efficiency. Available with optional bolt-on edge.
Optimized for handling sand or aggregate in small fractions, making it the ideal choice for soft underfoot conditions. The long bucket floor maximizes penetration for improved traction and its flat design helps to maintain a clean and level work area. Available with optional bolt-on edge.
The best all-round bucket. When fitted with bolt-on edges it works well handling loose material and aggregates in both short cycle and load and carry operations. When fitted with welded teeth options and segments, it is the best choice for loading easily broken material from banks.
Available for: L120GZ
The best choice for all-round efficiency. The bucket is primarily intended for use in low-impact operations, with moderately abrasive materials such as dirt, loam, gravel, and clay. Reflective stickers boost visibility for quick and easy filling. Reinforced with wear resistant steel HB400 and HB500. Can be equipped with bolt-on edges, welded teeth options and segments.
Optimized for soft underfoot conditions and earth moving applications such as landscaping, stripping topsoil and grading. The smart bucket design offers maximum traction and break-out force, while maintaining a clean and level work area. Volvo recommends fitting your bucket with flush adapters and GP points.
Available for: L150H
The best choice for breaking-out hard and stony material and shot rock. Recommended to be fitted with 1 1/2 leg adapters, teeth (GP or AM) and segments. For gravel, fine shot rock and ore, it can be fitted with a bolt-on edge or teeth.
Heavy-duty, wear resistant bucket. Optimized for loading shot rock or easily broken material from a bank with high break-out capability. When fitted with welded teeth options and segments, it is the best choice for loading easily broken material from a bank.
Side dump rock buckets are designed for rock loading in tight locations like tunnels. The design makes it possible to load parallel with the truck by dumping the bucket sideways. This way of loading requires less space and is frequently used in tunnelling applications. The bucket is normally equipped with abrasive material rock teeth, 1 1/2 leg adapters and casted segments but can also be equipped with a bolt-on edge.
Engineered to deliver outstanding durability in quarry environments, this bucket is optimized for carrying blocks and loading overburden. High tensile steel and wear resistant parts are positioned in critical areas.
Available for: L350H
The Volvo high tip light material bucket has high capacity for handling low density materials such as compost, refuse, coal etc. The high tip bucket features an increased dump height over standard light material buckets as it is hydraulically lifted from a built-in frame.
The bucket is optimized for waste handling at a transfer station. With an extra-long floor and heavy-duty design, this bucket is ideal in push floor operations for both pushing the material to and packing (tamping) it in the container. The clamp arms enable the operator to push approximately 25% more material per load as well as remove material from the truck or container. A third hydraulic function is required to operate the bucket.
The attachment design may vary depending on machine model.